AQUACHEF FISH FEEDER

AquaChef automatically feeds your aquarium whether your at home or on the road.

ONE LESS THING TO REMEMBER.

Simple to program and use, the AquaChef fish feeder can automatically feed your aquarium fish both pellets or flake food up to 4 times each day.

BE LAZY.

Set up to four automatic feedings per day and deliver either a single or double feeding each time.

DUAL FEEDING MODE..

Dual feeding mode delivers two feedings within 60 seconds of each other – allowing you to feed your fish up to 8 times per day.

DIET OR NO DIET.

Adjustable hatch style feed door controls how much food is dispensed and doubles as a stir bar to reduce clumping.

SUPER EASY INSTALL.

Large adjustable clamp fits virtually any size aquarium and allow feeder to be easily removed for refill or cleaning..

FULL SIZE HOPPER.

Moisture resistant hopper has a capacity of 35 grams and will feed flake foods, pellets or crumbled feed.

TIMER OR MANUAL.

Manual override automatically delivers a single feeding at the press of a button.

More info

Model Hopper Capacity Daily Feedings Battery Dimensions
8024 35 grams Up to 8 per day 2 AA (included) 3″ x 5.25″ x 3″
  • 1 AquaChef Fish Feeder
  • 2 AA Batteries
  • Instructions

AquaChef Support Documentation

AquaChef Manual

AquaChef Fish Feeder Won't Feed at Time Interval

It is likely your simply missing a step in the programming instructions.

Please be sure to complete ALL of step #2 on page 4. A very common step hobbyists leave out of the programming schedule – at each timer interval you must also program the feeder to how much you want to feed. The feeder hopper can rotate once or twice – but it must be programmed by you. If you skip this step, the feed hopper will not rotate during your programmed interval.

How do you fill the hopper in the AquaChef?

Gently pull the hopper (rotating part of the feeder) away from the base-there may be some resistance. Once the hopper is off lay it down on the counter and fill with food through the hole in the back of the hopper (covered with round rubber disc). Once filled, place the hopper back onto the body of the feeder and adjust the amount of food desired to be dispensed.

How should the feed hopper be cleaned?

The feed hopper may be removed and rinsed with freshwater. Do not use any detergents when cleaning the hopper. Allow the hopper to air dry thoroughly before refilling with food and placing back in operation.