EFLUX WAVE PUMP KITS

IMMERSE YOURSELF IN WAVES.

Everything you need to create waves, surging water currents or a steady stream of water flow. Watch your corals pulsate from waves or crank up the flow and see your fish play in the water current – all with a single touch.

PUT YOUR OCEAN IN MOTION.

Corals thrive on the motion found in the ocean and their beauty is one reason you likely have a reef tank. eFlux wave pumps mimic the currents found on natural reefs, creating tank wide circulation that:

  • Helps prevents “dead zones” around your corals
  • Keeps your aquarium cleaner by dislodging detritus
  • Keeps corals active and healthy
  • Keeps fish active, preventing fatty build-up

Simple by design.

Running virtually silent, the highly efficient pump propeller design coupled with a low voltage (and super safe) DC motor produces strong water movement using very little power. Compact in size, place them virtually anywhere in your aquarium.

Find the eFlux Wave Pump that’s right for you.

COMPARE WAVE PUMP MODELS

Nano 6000/6004

Flow Range:

    • 132 – 660 gph (500-2500 lph)

Power Range:

    • 1 – 5 watts

SW Aquarium Size:

    • 20-45 gal.

Max. Glass Thickness:

    3/8″ / 10mm
6001/6005

Flow Range:

    • 210 – 1050 gph (795-3975 lph)

Power Consumption:

    • 2-10 watts

SW Aquarium Size:

    • 45-60 gallons

Max Glass Thickness:

    1/2″ / 12mm
6002/6006

Flow Range:

    • 420 – 2100 gph (1590-7950 lph)

Power Consumption:

    • 5-23 watts

SW Aquarium Size:

    • 65-125 gallons

Max Glass Thickness:

    5/8″/15mm

Direct the Current.

Adjustable swivel design provides directional water flow precisely where you need it most and installs in seconds. The magnetic bracket installs in seconds, allowing you to position it virtually anywhere and provides easy access for adjustment and cleaning.

WATCH PUMP CLEANING VIDEO

Crank up the flow.

WATCH TIPS ON Picking FLOW MODES

Movement synchronized.

eFlux Wave Pump Kits are expandable, allowing you to connect up to 2 additional accessory wave pumps. Sync/anti-sync multiple wave pumps to create even more flow modes or add more flow as your reef grows.

More info

Kit Model / Accessory ModelFlow Range (gph)
(Adjustable)
Watts Range
(Adjustable)
Max. Size
Marine Aquarium
Max. Size
Freshwater Aquarium
Max. Wall
Glass Thickness
Wave Pump Dimensions
6000/6004132 - 6601 - 540 gal. / 151L65 gal. / 246L3/8" / 10mm2.5" x 2" x 2"
6001/6005210 - 10502 - 1070 gal. / 265L110 gal. / 416L1/2" / 12mm3" x 2" x 2"
6002/6006420 - 21005 - 23125 gal. / 473L175 gal. / 663L5/8" / 15mm3.5" x 3.8" x 2.2"

Each eFlux wave pump kit Includes:

  • eFlux wave pump
  • Magnetic swivel bracket
  • 24V DC UL® power supply
  • LED pump display with wireless remote
  • LOOP microUSB cable & IR sensor cable
  • eFlux Wave pump HUB (up to 3 pumps)
  • Foam guard & cable protector
  • Instructions

Each eflux accessory wave pump Includes:

  • eFlux wave pump
  • Magnetic swivel bracket
  • 24V DC UL® power supply
  • Foam guard & cable protector
  • Instructions

Download Documents

Videos

Troubleshooting Tips
Instructions for programming Wave Pump #2 to Sync/Anti-Sync with Wave Pump #1

Using eFlux Wave Pump Controller & Remote

1. Press the PUMP 1 key, PUMP 1 LED will illuminate on the LED display.

2. Press WAVE or SURGE key, mode will illuminate on the LED display
3. Use the up/down arrow keys to adjust FLOW and FREQUENCY, display will adjust to desired programming.

4. Press the PUMP 2 key, PUMP 2 LED will illuminate on the LED display.

5. The P/S LED will turn off when PUMP 2 is in its own Primary programming mode.

6. To program PUMP 2 in Secondary Mode, Press PUMP 2 key.
7. Press the P/S key and HOLD for 5 seconds.
P/S LED will illuminate on the LED display.

To place back into Primary mode, simply press P/S and hold for 5 seconds.

Why is my IR remote control not working?

Please review the following troubleshooting tips:

1. Ensure the LOCK mode on your remote is not ON.If your using the LOOP Remote with lighting control, press the pink LOCK key at the bottom.The LOCK icon should not be displayed on the screen (should be off.) If using a Wave Pump remote, ensure LCK is not illuminated on the LED display screen.

2. Ensure you have a clear path to the IR receiver.The IR receiver is located on the LOOP Controller display, or via the IR sensor cable included with your product.If using the cable, ensure its plugged into the correct microUSB port and receiving signals.

3. If the lock feature is not turned on and the controller is not receiving signals from the remote – replace the battery in the remote with a new one.

What is the maximum thickness of glass that the magnets will work with?

The model 6000/6004 (660 gph) can be used on a maximum tank thickness of 3/8″ or 10mm.

The model 6001/6005 (1050 gph) can be used on a maximum tank thickness of 1/2″ or 12mm.

The model 6002/6006 (2100 gph) can be used on a maximum tank thickness of 5/8″ or 15mm.